The thin-walled stainless steel water pipe with nominal diameter bigger than DN80 will mostly use the groove connection type. So when we are installing the groove type stainless steel pipe fittings, what are the tips?

• First, let's look at the advantages of grooved stainless steel pipe fittings

1. Fast and handiness

2. Reliable.

3. Safe.

4. Economic.

5, occupy small space.

6. Simple maintenance.

7. Pipes are common.

8. Flexible connection of pipeline.

• Secondly, installation tips of groove type stainless steel pipe fitting as below:

1, In the installation process of grooved stainless steel pipe fittings, we need to pay extra attention to avoid collision with sharp objects, so that damage the pipeline.

2, Need to prevent stainless steel elbow and other accessories from paint during installation, so as to avoid adhesion of paint to the outer wall of the pipe, affecting the appearance of beauty.

3.During the installation process, if it is not finished at one time, it is necessary to protect the unclosed pipe mouth from other debris. After the installation is finished, you also need to clean other contaminants in the thin-walled stainless steel water pipes.

4.After the installation, it is necessary to do the hydraulic test. The hydraulic test can be done by layers or a single set, which needs to be carried out after the completion of the whole project.

5.Construction personnel shall check the firmness of pipe fittings, valves, gaskets and fasteners after installation. If there are inappropriate parts, it is necessary to replace the temporary short pipe as soon as possible. Irrigating from the low pressure and inflating from higher place is also a pressure test work. After the pressure test, it is necessary to carry out the whole cleaning work to ensure the cleanliness of the pipeline system.